tE2 flags a thermistor problem on an LG dryer, normally in cold conditions or during steam cycles.
Model compatibility: LG reuses codes across series and model years, so tE2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this error means
Thermistor error, typically in cold conditions or steam cycles.
Why tE2 appears
Extra humidity in the drum during SteamFresh, Steam Sanitary or Steam options cools the duct quickly. LG also notes that very cold weather or poor venting can bring it on, when outside air flows back through an open exhaust.
At a glance
Code
tE2
What it means
Thermistor error, typically in cold conditions or steam cycles.
What you can check
Wash the lint tray with warm water and a soft brush and let it dry, then check that the outside exhaust flappers open all the way and remove any visible lint near the exhaust.
When to call a technician
If tE2 returns after a reset, the dryer may need a service visit from a technician.
Fixes in the manual
Wash the lint tray with warm water and a soft brush, then let it dry.
Look at the exhaust outlet outside, for flappers, a cage or mesh, and check the flappers open all the way.
Take away visible lint near the exhaust.
Warm the dryer by running it empty for a few minutes on another cycle, or pick steam fresh and press more time until big shows.
Service may be needed if the code returns after a reset.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your LG appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Request Dryer Repair for LG equipment with repeat symptoms, diagnostic codes, performance problems, or model-specific issues. Start with the issue you can verify.