The nP display on an LG dryer says the heater gets no current; the cord, breaker and wall outlet are the places to look.
Model compatibility: LG reuses codes across series and model years, so nP may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this error means
No current detected at the heater (usually home wiring).
What nP says
The heater is not receiving current, and that normally traces back to the wiring in the house rather than the dryer.
At a glance
Code
nP
What it means
No current detected at the heater (usually home wiring).
What you can check
Confirm the cord is firmly plugged into a grounded 240 volt outlet matching the rating plate, then switch the dryer's breaker off for at least 10 seconds and back on.
When to call a technician
If nP is still displayed, have an electrician confirm the outlet voltage. When the outlet is fine and the dryer is not heating, it requires repair service.
Owner checks
Cord: firmly plugged into a grounded 240 volt outlet, matching the rating plate.
Breaker: switch the dryer’s breaker off for at least 10 seconds, then on.
Outlet: an electrician should confirm the voltage if nP is still displayed.
When the dryer still will not heat
If the outlet is fine and the dryer is not heating, it requires repair service.
See also
PS relates to power cord wiring at the terminal block.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your LG appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Request Dryer Repair for LG equipment with repeat symptoms, diagnostic codes, performance problems, or model-specific issues. Start with the issue you can verify.