Skip to content
Same-day and next-day appointments in most areas.
Specialized LG repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

LG Dryer d75 Code: Restricted exhaust airflow

Error code d75 / d80 / d90 / d95
Appliance Dryer
Quick answer

Guide to the d75, d80, d90 and d95 codes on LG dryers and the airflow checks to run.

Model compatibility: LG reuses codes across series and model years, so d75 / d80 / d90 / d95 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this error means

Restricted exhaust airflow.

Reading the code

Four codes share one story: d75, d80, d90 and d95 report a clogged exhaust duct, and the digits stand for 75, 80, 90 and 95. The Flow Sense indicator with two or four bars lit says the exhaust system is severely restricted. Hot, humid air that cannot vent leaves moisture in the drum and clothes.

At a glance

Code d75 / d80 / d90 / d95
What it means Restricted exhaust airflow.
What you can check Clean the lint tray, run smaller loads, and inspect the hose from dryer to wall for crushing or kinks. Clear the outside vent flaps and make sure the duct is not crushed.
When to call a technician If the code returns after the vent is clear, a long duct hides the blockage, or a gas dryer shows d80, bring in a technician. Duct cleaning is a job for a vent cleaning company.

Gas dryers

A d80 on a gas dryer can mean the unit is not getting enough gas.

Checklist

  1. Pull lint from the tray after every load.
  2. Wash the tray in warm water with a soft brush; air-dry it before putting it back.
  3. Run smaller loads so air moves from the back to the front of the drum.
  4. Inspect the hose from dryer to wall for crushing, dents, kinks or compression.
  5. Do not coil it circle over circle like a spring; an S-curve works.
  6. Look for holes and loose connections in the hose.
  7. Whether the duct is rigid, semi-rigid or flexible, make sure it is not crushed or kinked.
  8. Clear the outside vent flaps.

When a long duct hides the problem

Lint at the rear exhaust duct stretches drying time. Long duct runs, many elbows or transition ducts make blockages hard to trace. Stand outside while the machine runs and see if air is blowing out. Professional cleaning is the job of a local vent cleaning company.

Related

Take a look at gAS (dryer not receiving gas), IF (lint filter not detected on a WashTower dryer) and F0 (lint filter not seated properly).

LG dryer repair for the Miami, New York, Houston, Los Angeles and San Diego metro areas

The service-center number for those metro areas is (844) 703-4955. Mention which d-code you see, the model number and the vent checks already done. LG dryer repair has an overview.

Source: LG Dryer – Error Code List

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Seeing this code on your LG appliance?

Book a specialist visit for a clear estimate and approval before any repair.

Ready to Request a Repair?

Share the appliance, symptom, code, or model information you already have. You do not need to identify the failed part before booking.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Los Angeles, San Diego, Miami, New York and Houston metro areas.
Response time Same-day and next-day appointments in most areas.

Request your repair

Fields marked with * are required.

Call Book a Repair