nd tells you an LG dryer is not draining; the debris filter, drain hose and vent path are the places to check.
Model compatibility: LG reuses codes across series and model years, so nd may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this error means
No drain: clogged drain hose or debris filter, or kinked vent hose.
What nd points to
A no-drain condition, most often a clogged drain hose, a clogged debris filter, or a vent hose that is kinked or crushed.
At a glance
Code
nd
What it means
No drain: clogged drain hose or debris filter, or kinked vent hose.
What you can check
Clean the debris filter after removing its cover, inspect the drain hose for kinks or clogs, empty the lint filter, and check the vent hose and outside vent hood for crushing or blockage.
When to call a technician
If this code persists after those checks, the dryer may need service. A professional vent cleaning is also worth considering.
Work through these in order
Remove the cover over the debris filter and clean the filter well.
Inspect the drain hose itself for kinks, crushing or clogs.
Empty the lint filter after every load so airflow is not restricted.
Look at the vent hose behind the dryer for crushing, bends or kinks.
Outside, see whether the vent hood is blocked by debris and whether its flappers swing fully open.
A professional vent cleaning is worth considering if nd keeps appearing. A code that persists may need service.
Also check
tE1 / tE3 are thermistor (temperature sensor) errors.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your LG appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Request Dryer Repair for LG equipment with repeat symptoms, diagnostic codes, performance problems, or model-specific issues. Start with the issue you can verify.