PS and P5 report a supply voltage problem. Direct wall-outlet power and a 60-second restart are the steps given.
Model compatibility: LG reuses codes across series and model years, so PS, P5 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this error means
Power supply problem: the supply voltage is not correct.
Voltage not right
An LG washer that shows PS has found a supply problem and halts its program. P5 is the same code, because S and 5 appear identical on a 7-segment display. Front-load and top-load washers are both covered.
At a glance
Code
PS, P5
What it means
The washer's supply voltage is not correct.
What you can check
Remove any power strip and connect straight to the wall outlet. Disconnect the power for 60 seconds, then start the washer again. On top-load models, the outlet should supply 120 V AC with correct polarity.
When to call a technician
If PS persists, or the washer will not power up even from a proper outlet, request a service visit.
Outlet and restart
Remove any power strip from the picture and connect straight to the wall outlet.
Disconnect the power for 60 seconds.
Start the washer again.
When the washer will not power up
On top-load models the manual says to check the source: 120 V AC with correct polarity. Persistent PS means requesting service.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your LG appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Request Washer Repair for LG equipment with repeat symptoms, diagnostic codes, performance problems, or model-specific issues. Start with the issue you can verify.