F51 is a griddle sensor error on LG ranges and ovens. The listed fix is a short power reset.
Model compatibility: LG reuses codes across series and model years, so F51 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this error means
F51 means a griddle sensor error on LG ranges and ovens.
Quick answer: F51 stands for a griddle sensor error.
At a glance
Code
F51
What it means
F51 means a griddle sensor error on LG ranges and ovens.
What you can check
Switch off the breaker that feeds the range, leave it off for 30 seconds, then switch it on again. Keep hands away from the wiring behind the control.
When to call a technician
Should F51 stay after the reset, or if you cannot do the steps, the unit will require a service visit.
Code at a glance
Display
Meaning
Owner action
F51
Griddle sensor error
Breaker off 30 seconds, then on
The entry covers LG range and oven models.
Reset routine
Switch off the breaker that feeds the range or oven.
Leave it off for 30 seconds.
Switch it on again.
Should the code stay after the reset, or if the steps cannot be done, LG says the unit will require service. Keep hands away from the wiring behind the control.
Compare with these codes
Also worth a look: F59 (griddle not heating properly), F56 (griddle heating error) and F52 (griddle sensor short detected).
LG range service near you
Based in the Miami, New York, Houston, Los Angeles and San Diego metro areas? Phone (844) 703-4955 about LG range service. Say which code is showing (F51), what the model is and what you attempted. More: LG range repair.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your LG appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Request Range Repair for LG equipment with repeat symptoms, diagnostic codes, performance problems, or model-specific issues. Start with the issue you can verify.