F38 is a communication error between the main board and inverter on LG ranges and ovens. The listed fix is a short power reset.
Model compatibility: LG reuses codes across series and model years, so F38 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this error means
F38 means a communication error between the main board and inverter on LG ranges and ovens.
Try this first
Go to the breaker panel and turn the unit’s breaker off.
Count out 30 seconds.
Flip the breaker back to on.
What the control is telling you with F38: a communication error between the main board and inverter.
At a glance
Code
F38
What it means
F38 means a communication error between the main board and inverter on LG ranges and ovens.
What you can check
Go to the breaker panel, turn the range breaker off, count out 30 seconds, then flip it back on.
When to call a technician
A repeating F38, or a reset you cannot perform, ends with a service visit.
Code at a glance
No specific series is given; the code is shown for LG ranges and ovens alike.
Keep in mind that a repeating code or an impossible reset ends with a service visit.
Compare with these codes
F33 is a front induction burner temperature sensor error.
Our LG range service area takes in the Miami, New York, Houston, Los Angeles and San Diego metro areas. The number is (844) 703-4955; keep the model number, the displayed code F38 and your reset notes close. See LG range repair.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your LG appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Request Range Repair for LG equipment with repeat symptoms, diagnostic codes, performance problems, or model-specific issues. Start with the issue you can verify.